Quantum Slipstream Drive

			Academy Library

Starfleet Engineering School Majors Engineering Communications & Operations Engineering Resources Starfleet Corps of Engineers Journal of the SCE Utopia Planitia Fleet Yards Components Engineering Starfleet Equipment & Devices System Diagnostics Engineering Systems Computer Systems Engineering Utilities Propulsion Engineering Impulse Systems Warp Theory Warp Drive Quantum Slipstream Spore Drive Academy Curriculum Alien Races Command Flight Control (Navigation) Medicine Miscellaneous Science Security & Tactical Edit this nav The quantum slipstream drive is an advanced form of propulsion technology first encountered by the USS Voyager in the Delta Quadrant, which had the capability of exceeding a starship's maximum warp factor by an unprecedented degree. Similar in principle to the transwarp technology utilized by the Borg, it was originally developed by a Delta Quadrant race designated by the Borg as "Species 116." After the return of Voyager from the Delta Quadrant, Starfleet began analyzing the various new technologies they brought with them. The Vesta class was the first to include the slipstream technology as its native and primary source of faster-than-light propulsion. In 2390, Starfleet gave final authorization for slipstream drives to be installed on new ships. Older ships would be called back for refit as befitting their mission and requirements. The primary goals of Starfleet in utilizing the new technology was expanding the reach of the Federation and enabling faster travel in cases of emergency. Operations guide The Starfleet Corps of Engineers has prepared the following document for reference: The Quantum Slipstream Drive – An Operations Guide Basics of Quantum Slipstream A Starfleet shuttle in the slipstream. Speed The standard Starfleet slipstream drive allows for travel at warp-factor 9.99998477, or 300 light years per hour. Drive stamina At its current technological advancement, Starfleet slipstream drives can only be operated for a maximum of approximately 12 hours before initiating auto-shutdown procedures. This allows a ship to travel 3,600 light years from where they started. Warm-up time Starfleet slipstream drives require a warm-up cycle before they can be engaged. This warm-up cycle requires 40 minutes of preparation by a trained Starfleet Engineering Officer. Cool-down time Once the drive is deactivated, it cannot be reactivated for at least 36 hours. Any attempt to warm-up the drive before the cool-down cycle has completed could result in an unstable slipstream. Upgrade cycle As the technology rolls out to the fleet, it will be necessary for ships to return to spacedock, on average, every two years for a minor refit and hull inspection to ensure that the slipstream drives are not compromising the long-term integrity of the fleet. Content from this article may have come partially, or entirely from  Memory Alpha