System Diagnostics

			Academy Library

Starfleet Engineering School Majors Engineering Communications & Operations Engineering Resources Starfleet Corps of Engineers Journal of the SCE Utopia Planitia Fleet Yards Components Engineering Starfleet Equipment & Devices System Diagnostics Engineering Systems Computer Systems Engineering Utilities Propulsion Engineering Impulse Systems Warp Theory Warp Drive Quantum Slipstream Spore Drive Academy Curriculum Alien Races Command Flight Control (Navigation) Medicine Miscellaneous Science Security & Tactical Edit this nav All key operating systems and subsystems aboard the ship have a number of pre-programmed diagnostic software and procedures for use when actual or potential malfunctions are experienced. These various diagnostic protocols are generally classified into five different levels, each offering a different degree of crew verification of automated tests. Which type of diagnostic is used in a given situation will generally depend upon the how critical the situation, and upon the amount of time available for the test procedures. Level 1 Diagnostic This refers to the most comprehensive type of system diagnostic, which is normally conducted on ship's systems. Extensive automated diagnostic routines are performed, but a Level 1 diagnostic requires a team of crew members to physically verify operation of system mechanisms and to system readings, rather than depending on the automated programs, thereby guarding against possible malfunctions in self-testing hardware and software. Level 1 diagnostics on major systems can take several hours, and in many cases, the subject system must be taken off-line for all tests to be performed. Level 2 Diagnostic This refers to a comprehensive system diagnostic protocol, which, like a Level 1, involves extensive automated routines, but requires crew verification of fewer operational elements. This yields a somewhat less reliable system analysis, but is a procedure that can be conducted in less than half the time of the more complex tests. Level 3 Diagnostic This protocol is similar to Level 1 and 2 diagnostics but involves crew verification of only key mechanics and systems readings. Level 3 diagnostics are intended to be performed in ten minutes or less. Level 4 Diagnostic This automated procedure is intended for use whenever trouble is suspected with a given system. This protocol is similar to Level 5, but involves more sophisticated batteries of automated diagnostics. For most systems, Level 4 diagnostics can be performed in less than 30 seconds. Level 5 Diagnostic This automated procedure is intended for routine use to verify system performance. Level 5 diagnostics, which usually require less than 2.5 seconds, are typically performed on most systems on at least a daily basis, and are also performed during crisis situations when time and system resources are carefully managed.