2,024
edits
Warp XV Development: Difference between revisions
→Fleetwide Testing Procedures: some better formatting for the list
Oddas Aria (talk | contribs) (moved some stuff around to reflect the latest missions of the Eagle) |
Oddas Aria (talk | contribs) (→Fleetwide Testing Procedures: some better formatting for the list) |
||
| Line 49: | Line 49: | ||
The Advanced Starship Design Bureau, in association with the Starfleet Corp of Engineers, has developed the following outline of recommended test procedures to be followed by all ships participating in Phase One of the Warp Core refit program. These steps are intended to bring uniformity and consistency to systems testing and should be used as a framework for the execution of all post-upgrade certification work. If any major deviations from expected performance are observed, please forward all relevant test data to the Corp of Engineers immediately for review and appraisal. | The Advanced Starship Design Bureau, in association with the Starfleet Corp of Engineers, has developed the following outline of recommended test procedures to be followed by all ships participating in Phase One of the Warp Core refit program. These steps are intended to bring uniformity and consistency to systems testing and should be used as a framework for the execution of all post-upgrade certification work. If any major deviations from expected performance are observed, please forward all relevant test data to the Corp of Engineers immediately for review and appraisal. | ||
# "Batten Down the Hatches" - Test Prep - the ship is moved (towed, preferably) to a prosaic area of space and inspected from stem to stern for any irregularities before anything is started. Loose bolts are tightened, windows are closed, and any of Wesley's science experiments are safely shut down and stored until the experimental period is concluded. Good opportunity for some 'slice of life' time aboard ships as things are reviewed and stored. | |||
# "Does the damn thing even start" - Phase One - New engine core is brought online - ship gets a comprehensive post-power-up inspection and systems are verified to be working as expected. Core stays online at a low idle for a pre-determined period of time. | |||
# "Put the parking brake on" - Phase Two - Static Engine Spin-up test - the core is slowly brought up to full power while the ship is motionless and is left to thrum away at full power for a short time to make sure nothing rattles apart or falls off. In an old submarine movie, this'd be the point where a few non-important pipes burst or the ship lists unexpectedly. | |||
# "Ok, put it in first." - Phase Three - Point to point warp flight between two known points at a stable speed, like warp 5 or 6. Everybody is on the lookout for problems and runs through standard diagnostics on everything (sensors, tactical systems, etc) while in flight to make sure there are no unusual interactions between the new systems and existing ones. | |||
# "Fine, floor it." - Phase Four - Point to point warp flight between two known points at max obtainable speed. Tests the maximum sustained output level of the core along with any structural issues that may come up from extended use. | |||
= Shipboard Missions = | = Shipboard Missions = | ||