Quantum Slipstream Drive

From 118Wiki
Revision as of 04:01, 20 November 2014 by Rich (talk | contribs)
Jump to navigation Jump to search
Academy Library


Academy.jpg



Edit this nav
SFA-Engineering.png
Quantum slipstream drive core.jpg
The quantum slipstream drive was an advanced form of propulsion technology first encountered by the USS Voyager in the Delta Quadrant, which had the capability of exceeding a starship's maximum warp factor by an unprecedented degree. Similar in principle to the transwarp technology utilized by the Borg, it was originally developed by a Delta Quadrant race designated by the Borg as "Species 116."

After the return of Voyager from the Delta Quadrant, Starfleet began analyzing the various new technologies they brought with them. The Vesta-class was the first to include the slipstream technology as its native and primary source of faster-than-light propulsion.

In 2390, Starfleet gave final authorization for slipstream drives to be installed on new ships. Older ships would be called back for refit as befitting their mission and requirements. The primary goals of Starfleet in utilizing the new technology was expanding the reach of the Federation and enabling faster travel in cases of emergency.

Operations guide

The Starfleet Corps of Engineers has prepared the following document for reference:

Basics of Quantum Slipstream

Speed

The standard Starfleet slipstream drive allows for travel at warp-factor 9.99998477, or 300 light years per hour.

Drive stamina

A Starfleet shuttle in the slipstream.
At its current technological advancement, Starfleet slipstream drives can only be operated for a maximum of approximately 12 hours before initiating auto-shutdown procedures. This allows a ship to travel 3,600 light years from where they started.

Warm-up time

Starfleet slipstream drives require a warm-up cycle before they can be engaged. This warm-up cycle requires 40 minutes of preparation by a trained Starfleet Engineering Officer.

Cool-down time

Once the drive is deactivated, it cannot be reactivated for at least 36 hours. Any attempt to warm-up the drive before the cool-down cycle has completed could result in an unstable slipstream.

Upgrade cycle

As the technology rolls out to the fleet, it will be necessary for ships to return to spacedock, on average, every two years for a minor refit and hull inspection to ensure that the slipstream drives are not compromising the long-term integrity of the fleet.

Ma-logo.png
Content from this article may have
come partially, or entirely from
 
Memory Alpha