Talk:StarBase 118 Deck Layout

Deck Ranges

I calculated the deck ranges, to give us a better idea of where things are. My method was simplistic: I took a graphic of the starbase, and then sized it to 935 pixels high -- the same # of decks on the base. Thus, I had a representation of the base where each deck is 1 pixel. (BTW, I removed the towers and the "platform" underneath them when I counted the decks, as well as the antennas on the subspace array. I assume that the towers and their platform would be +1 type decks.) I then placed guides at the bottom of each "section" of the base and found the pixel on the Y axis that this corresponded to. That pixel then became a deck number. --Wolf /^{talk page} 18:47, 26 June 2006 (CDT)

There is a section below the engineering area, but above the subspace array, that is not sized on either of the representations [1] [2] of the base sections. So, I assumed that this section was a "lower habitat area," thus the second set of ranges for the habitat area. --Wolf /^{talk page} 18:50, 26 June 2006 (CDT)