Independence-A Main Engineering: Difference between revisions
Ethanbrice (talk | contribs) |
Ethanbrice (talk | contribs) |
||
| Line 15: | Line 15: | ||
[[Image:Prometheus MSD.jpg|thumb|left|Master Systems Display]] | [[Image:Prometheus MSD.jpg|thumb|left|Master Systems Display]] | ||
All three sections are independently commanded but observed from one section in Main Engineering under the Master Systems Display (MSD). | All three sections are independently commanded but observed from one section in Main Engineering under the Master Systems Display (MSD). All relative ship information (such as damage, power distribution, etc.) is displayed on the cutaway image of the Prometheus Class starship. This monitor can be used to direct ship operations and can be configured for limited flight control if necessary. | ||
Coupled with the MSD is the monitor specifically for the Warp Drive, giving accurate readouts of temperature and condition. The regulator is manned by one Engineer at all times who puts it through diagnostic cycles every few hours to maintain it's peak efficiency. | Coupled with the MSD is the monitor specifically for the Warp Drive, giving accurate readouts of temperature and condition. The regulator is manned by one Engineer at all times who puts it through diagnostic cycles every few hours to maintain it's peak efficiency. | ||
Revision as of 09:08, 5 November 2011
| USS Independence-A | ||
|---|---|---|
 LOST | ||
| ||
The Engineering Department of the USS Independence-A provides the essential support required for the ship and other departments.
Engineering on the Independence-A comprises of multiple sectors divided up by the multitude of sub-departments within.
Main Engineering can be found on Deck 5 however it has been uniquely designed ability to split into three sections, dividing the warp core which allows all three sections to achieve warp when the Multi-Vector Assault Mode is activated.
Master Systems Display
All three sections are independently commanded but observed from one section in Main Engineering under the Master Systems Display (MSD). All relative ship information (such as damage, power distribution, etc.) is displayed on the cutaway image of the Prometheus Class starship. This monitor can be used to direct ship operations and can be configured for limited flight control if necessary.
Coupled with the MSD is the monitor specifically for the Warp Drive, giving accurate readouts of temperature and condition. The regulator is manned by one Engineer at all times who puts it through diagnostic cycles every few hours to maintain it's peak efficiency.
Research and Development
Under Construction
| USS Independence-A Deck Tour | |
| Operations | Main Bridge · Conference Room · Briefing/Training Room · Operations Office |
| Medical/Science | Main Sickbay · Operating Theatre · Counseling Suite · Science Labs |
| Engineering | Main Engineering |
| Security/Tactical | Main Security · Armory · Brig · Drilling Range |
| Recreation | Theatre · Chapel |
| Browse More Articles on the USS Independence-A | |