Talk:StarBase 118 Deck Layout: Difference between revisions
Jump to navigation
Jump to search
(How I found the deck ranges.) |
(→Deck Ranges: 2nd set of habitat ranges.) |
||
| Line 1: | Line 1: | ||
==Deck Ranges== | ==Deck Ranges== | ||
I calculated the deck ranges, to give us a better idea of where things are. My method was simplistic: I took a [[:Image:Spacedockearth.gif|graphic]] of the starbase, and then sized it to 935 pixels high -- the same # of decks on the base. Thus, I had a representation of the base where each deck is 1 pixel. (BTW, I removed the towers and the "platform" underneath them when I counted the decks, as well as the antennas on the subspace array. I assume that the towers and their platform would be +1 type decks.) I then placed guides at the bottom of each "section" of the base and found the pixel on the Y axis that this corresponded to. That pixel then became a deck number. --[[User:FltAdml. Wolf|Wolf]] /<sup>[[User talk:FltAdml. Wolf|talk page]]</sup> 18:47, 26 June 2006 (CDT) | I calculated the deck ranges, to give us a better idea of where things are. My method was simplistic: I took a [[:Image:Spacedockearth.gif|graphic]] of the starbase, and then sized it to 935 pixels high -- the same # of decks on the base. Thus, I had a representation of the base where each deck is 1 pixel. (BTW, I removed the towers and the "platform" underneath them when I counted the decks, as well as the antennas on the subspace array. I assume that the towers and their platform would be +1 type decks.) I then placed guides at the bottom of each "section" of the base and found the pixel on the Y axis that this corresponded to. That pixel then became a deck number. --[[User:FltAdml. Wolf|Wolf]] /<sup>[[User talk:FltAdml. Wolf|talk page]]</sup> 18:47, 26 June 2006 (CDT) | ||
: There is a section below the engineering area, but above the subspace array, that is not sized on either of the representations [http://ops.starbase118.net/sections/sections.html] [http://www.starbase118.net/wiki/index.php/Image:Sb118_1.gif] of the base sections. So, I assumed that this section was a "lower habitat area," thus the second set of ranges for the habitat area. --[[User:FltAdml. Wolf|Wolf]] /<sup>[[User talk:FltAdml. Wolf|talk page]]</sup> 18:50, 26 June 2006 (CDT) | |||
Revision as of 23:50, 26 June 2006
Deck Ranges
I calculated the deck ranges, to give us a better idea of where things are. My method was simplistic: I took a graphic of the starbase, and then sized it to 935 pixels high -- the same # of decks on the base. Thus, I had a representation of the base where each deck is 1 pixel. (BTW, I removed the towers and the "platform" underneath them when I counted the decks, as well as the antennas on the subspace array. I assume that the towers and their platform would be +1 type decks.) I then placed guides at the bottom of each "section" of the base and found the pixel on the Y axis that this corresponded to. That pixel then became a deck number. --Wolf /talk page 18:47, 26 June 2006 (CDT)
- There is a section below the engineering area, but above the subspace array, that is not sized on either of the representations [1] [2] of the base sections. So, I assumed that this section was a "lower habitat area," thus the second set of ranges for the habitat area. --Wolf /talk page 18:50, 26 June 2006 (CDT)
![[2]](http://www.starbase118.net/wiki/index.php/Image:Sb118_1.gif){kind=link}